If You Care For Your Car, Then Show Your Garage Some Love Too

When your car is your baby, you are willing to spend as much time as necessary to keep it in the best condition possible. But do you show the same care for your garage? Part of keeping your car in pristine condition is making sure the space in which it spends the most time is also in great shape. If you haven’t shown your garage some love in a while, then here are a few things you can do today to get it back on track.

Keep it Clean

If your garage is dirty, you may find it harder to keep your car clean too. Take the time to clean up any debris that may be lying around, and clean all of your surfaces on a regular basis. Unkempt areas full of dust and dirt won’t do your car any favors, so make an effort to keep the garage in reasonable shape too.

If You Care For Your Car, Then Show Your Garage Some Love Too

The same rules pertain to the floor as it does on other surfaces. You want to regularly sweep out the area. Additionally, make sure any spills are properly managed quickly. Not only can this help preserve the appearance of the floor, but it can also help avoid any dangerous chemicals or materials from seeping into the ground.

This is especially true if you invite people over who ultimately want to see your car. No matter how great the car looks, a messy, grimy garage steals some of the spotlight. Help your car make the best impression by keeping the exterior or your garage as nice as the interior. A Sun Joe pressure washer can help clean exterior surfaces quickly and without any unnecessary chemicals.

Maintain the Garage Door

A garage door requires regular maintenance to ensure it is operating properly. Failure to do so can lead to damage and may even render the system inoperable, trapping your car inside or outside of the space depending on when the failure occurs. In a worst case scenario, it may even come crashing down on your car, causing unknown amounts of damage.

To keep things in working order, you first want to regularly inspect the door and tracks. Clean any exposed surfaces to remove dirt and grime, especially in the hinges or roll. The system also needs additional lubrication on a regular basis, and you want to make sure the door is properly balanced.

Other tasks may also be required. When in doubt, consult your owner’s manual regarding any care instructions and follow them to the letter. Neglecting regular maintenance can lead to operational issues, some of which can be dangerous.

If the door is damaged or you are experiencing issues with its operation, then you may need to work with a professional to get everything repaired or replaced.

Mind Your Lighting

While a burned out light bulb doesn’t immediately spell a problem, having insufficient lighting while you work may make it harder to spot hazards or see what you are doing while completing tasks. Often, replacing light bulbs is fairly easy, so there is no reason to neglect this form of maintenance. Simply keep a supply of light bulbs in the garage and replace burned out bulbs when necessary. When your supply gets low, grab some on your next trip to the store. Then, you know you will always have one available when you need it.

Make Your Ride Shine

When you want your car to say something about you, it needs to do more than just run well, it needs to stand out in a crowd.  In order to really bring out the shine, taking extra steps beyond a basic handwashing are often required.  Consider these additional steps the next time you are preparing your car to be seen at a race, show, or on the road, and you will be sure to make an impression.

Pressure Washing

If your car is covered in dirt and other road grime, you will want to pressure wash the vehicle before applying any cleaners or detergents.  Once the surface dirt has been lifted, apply the detergents to the vehicles surface.  Finally, rinse the detergent off, from top to bottom, using the pressure washer, and then seal and dry.

Pressure washers are also highly effective for cleaning tires and wheel rims, and the water pressure can more easily reach hard to reach areas.  If using a pressure washer is going to become a standard part of your car care routine, consider checking out a selection electric pressure washer reviews and purchasing one for your personal use.

Make Your Ride Shine

Hard Waxes

Hard waxes, though harder to apply, provide a higher level of protection than liquid or soft waxes, as well as a nice shine on most paint finishes.  It is important to avoid abrasive waxes, especially on cars with a dark paint job, as the abrasive qualities may damage the finish.

Apply the wax in sections, working in a circular motion as you apply it.  Once applied, you will need to let the wax set based on the time recommended by the manufacturer before using a soft cotton rag to buff and polish the finish.

Tire Products

Once you have the body of your car shining, you will want to pay attention to the tires.  A variety of products are available to help bring back the original shine, with many options being available in spray on versions.

First, the product is sprayed onto the tires.  After the product has set for a few minutes, it can be wiped off with a clean rag.  Be sure to avoid overspray hitting other portions of the car, as it can leave stains on certain materials, such as those used on side panels and rims.

Aluminum Rim Care

Just as the tires require a special product, so do aluminum rims if you really want them to shine.  Since they should have been pressure washed with the rest of the vehicle, a simple aluminum polish is often all that you need.  After making sure the rim is completely dry, just apply a small amount of polish to a clean cloth and begin working it onto the surface in small circular motions.  Continue applying and polishing until the desired finish is reached on all four tires.

Polycarbonate Headlight Coverings

Overtime, polycarbonate headlight coverings can cloud.  In order to restore the original look, begin by sanding the surface taking care not to contact the painted car body.  The sanding should remove any yellow coloring that has built up on the light, and let the surface somewhat dull and rough to the touch.  Follow up the sanding with a fine polish which will restore the lenses to a clear state.  Finally, apply a UV sealant to protect the finish.